Skip to main content


Full Description

Our value proposition is to provide detailed data on concrete conditions in real-time, through the curing process as well as the operational lifetime. We achieve this through our proprietary technology, the Smart Cement system. This technology gives concrete sensing capabilities so that a user will be able to monitor the exact status of their structures in real-time, at very high sensitivities. These properties include cracking, contamination, corrosion, temperature changes, and more. By gathering and delivering data on these properties, we can make structures “smart” and ultimately mitigate potential failures.


The system starts by mixing our proprietary cement additive throughout a cement mix. This additive is made up of very fine fibers. These fibers have conductive properties that we can use to gather data. Once the additive has been mixed in, the cement becomes piezoresistive. This just means that if any kind of stress is applied to the structure, an electrical property called resistivity will also change. These resistivity changes are the data we are going after. It is important to mention that we can gather this data during both the curing process of the cement as well as the operational lifetime of the concrete structure. This means we can detect if the cement does not set properly early on, as well as if it deteriorates years later. To extract the data from the structure, we use existing reinforcement as probes. For example, if our additive was implemented in a concrete bridge, we could use the steel rebar of that bridge to communicate analog resistivity data to our monitoring interface. Based on changes in this resistivity data, we can infer any cracks, damages, or corrosion in the structure. Furthermore, we are able to do this at very high sensitivities. This is critical because cement generally fails at only 0.2% strain, which is very difficult to read. But our Smart Cement technology can monitor this strain with about 2500 times magnification. This means we can even monitor temperature changes and contamination in structures. All of these variables can be monitored in real-time.